运用它们可以将多个物品连接在一起。当您要将一张纸贴到墙上,或是将一幅画挂在墙上时,您需要用紧固件将两种物品连接在一起。
这样一来,假如我们有众多不同类型的紧固件,那我怎么才能知道要使用哪种紧固件呢?
要想弄清楚使用哪种紧固件,那么我们还是要回到应用本身上来。
比如紧固件的应用环境、安装的难易程度、材料或重量的局限性、成本、美观性及可重复使用性之类的因素都应考虑在内。
鉴于此,Smalley 弹性挡圈应运而生。那什么是弹性挡圈呢,以及何时应该使用它呢?
弹性挡圈是一种工业紧固件,可用来将配套的组件或装配件固定在一起。
弹性挡圈是一种由金属制成的圆形部件,安装于(外壳或轴)凹槽中。
您可以使用内部(外壳)弹性挡圈,也可以使用外部(轴)弹性挡圈。顾名思义,内部挡圈安装于外壳凹槽中,而外部挡圈安装于轴凹槽中。
弹性挡圈可充当可拆卸轴肩。
弹性挡圈可用作加工轴肩的一种替代方法,省去了复杂的加工过程,最终节省了时间、减轻了重量和节约了生产成本,从而提高了生产效率。
弹性挡圈还可以简化您的装配体。一个弹性挡圈可以替代齿轮装配体上的多个螺栓,从而免去了钻孔和攻丝孔之类的工序,同时还简化了安装过程,节省了时间。下图所示的变速箱总成中,用两个 Spirolox 弹性挡圈替代了 24 个螺栓。
尽管还有其他类型的挡圈,但由于其低径向轮廓以及可靠性和便利性相对较差,工程师们还是会明确指定使用 Spirolox 弹性挡圈。
在您的应用中使用 Spirolox 弹性挡圈(也称为螺旋弹性挡圈),其优点在于这种弹性挡圈具有独特的结构型式。传统的卡扣挡圈设有凸耳(也称为凸缘)。由于 Spirolox 挡圈拥有 No-Ears-to-Interfere®(无凸耳干扰)设计,因此,它们能够与低径向轮廓的配合组件平滑接合。这类挡圈具有等截面,且其外形美观,让人赏心悦目。
由于这类挡圈无缺口,因此能够提供 360° 支撑表面,从而实现均匀的负荷分布,同时将配套组件稳妥地固定到位。
最后,与其他需要用到卡扣挡圈的挡圈相比,这类挡圈更易于安装和拆卸。Spirolox 挡圈可通过插入凹槽来进行安装,且具有一个拆卸槽口,无需专用工具即可轻松拆卸。
有关使用 Spirolox 弹性挡圈的优势的详细说明,请参阅官网博客弹性挡圈与卡簧的对比。
现在,您已经了解了什么是弹性挡圈以及为什么要使用弹性挡圈,接下来,我们将为您介绍如何制作弹性挡圈。
Smalley Spirolox 弹性挡圈是通过边缘卷绕工艺制成的,这种工艺能够提供精确而灵活的解决方案,唯独此工艺深受我们信任。
卡扣挡圈的传统制作方法是用钣金冲压而成,如下图所示。
Smalley 边缘卷绕工艺是通过把持扁线并将其缠绕在边缘上来实现的。也就是说,我们可以快速经济地制造挡圈。
冲压挡圈时会从中心位置冲出多余的废料,这种情况对于昂贵的制作材料和大直径挡圈而言尤其值得关注。由于在边缘卷绕过程中不会产生材料浪费,因此定制材料更加经济实惠。
边缘卷绕工艺的另一大优势在于,“无模具成本”工艺的设计极具灵活性。冲压定制挡圈时,需增加额外的模具成本来购置全新的冲头和模具,并且通常需要较长的备货时间。无论是原型制作还是量产,我们都能够在边缘卷绕工艺的任意阶段快速轻松地进行各种改良,从而在 No-Tooling-Costs™(无模具成本)工艺的辅助下,加快定制挡圈的交付进程。
Smalley 工程师已在 25,000 多个实践应用中积累了丰富的知识和经验。从您手腕上的表盘到风力涡轮机,在诸多应用场合中,无论规模大小,几乎都会用到弹性挡圈。
它们的身影遍布各行各业,您甚至可能都不知道它们身在何处。
当您进行年度检查时,您会在医生办公室的各种医疗设备中发现不少形态和大小各异的挡圈。当您开车时,您会在变速箱内找到 Smalley 挡圈,这些挡圈可为变速箱的日常运行保驾护航。当您搭乘飞机去度假时,您可能不知道,引擎中也会有弹性挡圈的身影。
在 Smalley,我们的工程师团队拥有众多行业专业知识,为您量身定制各种挡圈,以满足您的独特应用需求。
从轻型到重型,我们可提供 6,000 多种标准挡圈,其结构型式可细分为 30 种。您可以根据所需的负荷类型,选用单层或多层挡圈。由碳钢和不锈钢制成的标准尺寸范围为 6 mm - 400 mm(即 1/4 in. - 16 in.)。如果您使用的是传统卡扣挡圈,那么我们的弹性挡圈可与其进行凹槽互换。请查看我们的互换清单零件表以获取完整清单。
弹性挡圈主要有下列 5 种类型:单层 Spirolox 弹性挡圈、多层 Spirolox 弹性挡圈、等截面挡圈、Hoopster 挡圈和 WaveRing 波状弹性挡圈。
每种类型的挡圈用例如下所述。有关我们所提供的不同类型挡圈的详情,请参阅官网博客弹性挡圈类型。
定制挡圈(例如具有内/外径 (ID/OD) 锁、自锁和平衡等功能)也可供选用。
标准 Spirolox® 弹性挡圈可采用碳钢、302 和 316 不锈钢制成,而等截面挡圈(卡扣挡圈)和 Hoopster 挡圈可采用碳钢和 302 不锈钢制成。
弹性挡圈可采用多种定制材料制成,以满足各种独特的环境条件。请查阅我们的材料选择指南,并咨询 Smalley 工程师,以找到适合您应用中所用弹性挡圈的制成材料,从而实现最佳性能。
我们会将碳钢弹性挡圈浸没在油中,目的是为了防止这类挡圈在交付过程中遭到腐蚀。此外,我们也会提供各种类型的镀层和涂层,以满足您的特定应用需求。黑色氧化物、磷酸锌和镉镀层即是几种常见的饰面类型。
请查阅我们为您准备的弹性挡圈常见问题解答电子书。
关注我们